FLJ 48V/52V 1200W Electric Scooter Hub Motor Wheel with ChaoYang 80/60-6 10-Inch Tire (for C11 & T11)
Restore the acceleration, climbing power, and smooth riding performance of your electric scooter with the genuine FLJ 48V / 52V 1200W Brushless Hub Motor Wheel Assembly. Engineered as a direct OEM factory replacement for FLJ C11 and FLJ T11 electric scooters (as well as compatible 10-inch dual-motor platforms), this high-torque motor wheel comes pre-fitted with a premium ChaoYang 80/60-6 heavy-duty tubeless pneumatic tire.
Featuring pure copper stator windings, high-grade neodymium magnets, and a sealed aluminum alloy hub rim with integrated disc brake rotor mounting points, this complete wheel assembly delivers immediate plug-and-play restoration for either front or rear drive positions.

Key Features & Performance Highlights
- High-Torque 1200W Brushless Motor: Compatible with both 48V and 52V electrical systems, delivering brisk acceleration, strong hill-climbing torque, and top speeds up to 45–55 km/h (28–34 mph).
- ChaoYang 80/60-6 Pneumatic Vacuum Tire Included: High-grade directional tread provides low rolling resistance, whisper-quiet pavement rolling, rapid water evacuation, and puncture defense.
- Standard 6-Bolt Disc Brake Mount: Pre-machined rotor flange accepts standard electric scooter disc brake rotors for firm, reliable stopping power.
- Weatherproof Motor Wiring Harness: Reinforced axle wire exit with heavy rubber strain relief and silicone insulation to protect phase leads and Hall sensor cables from moisture and abrasion.
- Direct Drop-In Fitment for FLJ C11 & T11: Sized for standard 10-inch scooter swingarms with matching dropout widths and slotted solid axle flats.
Technical Specifications Matrix
| Parameter | Specification |
|---|---|
| Nominal Operating Voltage | 48V / 52V DC Compatible |
| Rated Power Output | 1200W High-Torque Brushless DC (BLDC) |
| Compatible Models | FLJ C11, FLJ T11, and universal 10-inch electric scooters |
| Mounted Tire Brand & Size | ChaoYang 80/60-6 (Standard 10-Inch Scooter Tire) |
| Tire Construction | Tubeless Pneumatic Vacuum Tire with 90° Valve Stem |
| Brake Interface | Standard 6-Hole Disc Brake Rotor Mount (44mm BCD) |
| Motor Electrical Leads | 3× Heavy-Gauge Phase Wires + 5-Pin Hall Sensor Connector |
| Rim & Hub Material | High-Strength Die-Cast Aluminum Alloy Enclosure |
| Recommended Tire Pressure | 45 – 50 PSI (310 – 345 kPa) |
Detailed Component & Hardware Gallery
Installation & Wiring Tips
- Power Down: Turn off the scooter and disconnect the battery pack before removing the wheel or touching controller wiring.
- Transfer Brake Rotor: Unscrew the 6 rotor bolts from your old wheel and transfer the disc brake rotor onto the new hub. Fasten in an alternating criss-cross star pattern with threadlocker.
- Seat Axle in Dropouts: Ensure the torque washers and axle flats align correctly into the swingarm slots to prevent axle spinning under acceleration.
- Connect Phase & Hall Leads: Plug the 3 motor phase wires (Yellow, Green, Blue) and the 5-pin Hall sensor plug into your scooter controller harness. Test motor rotation before tightening all swingarm bolts.
Frequently Asked Questions (FAQ)
Q: Can this motor wheel be used on both 48V and 52V scooters?
A: Yes. The internal copper windings and insulation are rated for both 48V and 52V battery systems without risk of overheating or electrical breakdown.
Q: Is the ChaoYang 80/60-6 tire already installed on the wheel?
A: Yes, this is a complete pre-assembled unit. The ChaoYang 80/60-6 tubeless tire is already mounted and beaded onto the hub motor rim, saving you the effort of mounting a tough tire onto a motor rim.
Q: Can this be installed as either the front or rear motor?
A: Yes, it is compatible with both front and rear positions on FLJ C11 and T11 scooters, provided your swingarm dropout spacing matches standard 10-inch electric scooter axle specifications.
Q: What warranty and transit guarantee does E Smart Way offer?
A: E Smart Way provides free worldwide tracked shipping, comprehensive transit loss protection, and a 6-month replacement warranty covering motor stator, magnets, and wiring defects.
International Shipping & Logistics Notice
Free Worldwide Tracked Shipping: Hub motor wheels are packaged in heavy-gauge reinforced cartons with molded foam cushioning to protect the axle threads, brake rotor mount, and tire bead during transit.
Customs & Import Duties: Depending on national regulations, international consignments may occasionally be subject to local VAT or clearance fees assessed by destination customs authorities. As standard in international cross-border trade, these charges remain the buyer's responsibility.
Accurate Delivery Details: Please double-check your shipping address and contact telephone number at checkout to ensure seamless courier delivery.