FLJ 48V/52V 1200W Electric Scooter Hub Motor Wheel with ChaoYang 80/60-6 10-Inch Tire (for C11 & T11)

FLJ 48V/52V 1200W Electric Scooter Hub Motor Wheel with ChaoYang 80/60-6 10-Inch Tire (for C11 & T11)

$158.00
Skip to product information
FLJ 48V/52V 1200W Electric Scooter Hub Motor Wheel with ChaoYang 80/60-6 10-Inch Tire (for C11 & T11)

FLJ 48V/52V 1200W Electric Scooter Hub Motor Wheel with ChaoYang 80/60-6 10-Inch Tire (for C11 & T11)

$158.00

Restore the acceleration, climbing power, and smooth riding performance of your electric scooter with the genuine FLJ 48V / 52V 1200W Brushless Hub Motor Wheel Assembly. Engineered as a direct OEM factory replacement for FLJ C11 and FLJ T11 electric scooters (as well as compatible 10-inch dual-motor platforms), this high-torque motor wheel comes pre-fitted with a premium ChaoYang 80/60-6 heavy-duty tubeless pneumatic tire.

Featuring pure copper stator windings, high-grade neodymium magnets, and a sealed aluminum alloy hub rim with integrated disc brake rotor mounting points, this complete wheel assembly delivers immediate plug-and-play restoration for either front or rear drive positions.

FLJ 48V 52V 1200W Electric Scooter Hub Motor Wheel with ChaoYang Tire

Key Features & Performance Highlights

  • High-Torque 1200W Brushless Motor: Compatible with both 48V and 52V electrical systems, delivering brisk acceleration, strong hill-climbing torque, and top speeds up to 45–55 km/h (28–34 mph).
  • ChaoYang 80/60-6 Pneumatic Vacuum Tire Included: High-grade directional tread provides low rolling resistance, whisper-quiet pavement rolling, rapid water evacuation, and puncture defense.
  • Standard 6-Bolt Disc Brake Mount: Pre-machined rotor flange accepts standard electric scooter disc brake rotors for firm, reliable stopping power.
  • Weatherproof Motor Wiring Harness: Reinforced axle wire exit with heavy rubber strain relief and silicone insulation to protect phase leads and Hall sensor cables from moisture and abrasion.
  • Direct Drop-In Fitment for FLJ C11 & T11: Sized for standard 10-inch scooter swingarms with matching dropout widths and slotted solid axle flats.

Technical Specifications Matrix

Parameter Specification
Nominal Operating Voltage 48V / 52V DC Compatible
Rated Power Output 1200W High-Torque Brushless DC (BLDC)
Compatible Models FLJ C11, FLJ T11, and universal 10-inch electric scooters
Mounted Tire Brand & Size ChaoYang 80/60-6 (Standard 10-Inch Scooter Tire)
Tire Construction Tubeless Pneumatic Vacuum Tire with 90° Valve Stem
Brake Interface Standard 6-Hole Disc Brake Rotor Mount (44mm BCD)
Motor Electrical Leads 3× Heavy-Gauge Phase Wires + 5-Pin Hall Sensor Connector
Rim & Hub Material High-Strength Die-Cast Aluminum Alloy Enclosure
Recommended Tire Pressure 45 – 50 PSI (310 – 345 kPa)

Detailed Component & Hardware Gallery

ChaoYang Tire Sidewall and Hub Motor Profile
Solid Axle and Motor Cable Exit
Disc Brake Rotor Mounting Holes
ChaoYang 80/60-6 Tread Design
Hub Rim Bead and Angled Air Valve
Motor Phase Wires and Hall Sensor Connectors
Opposite Side Axle Nuts and Washers
Complete 10-Inch Wheel Assembly Overview

Installation & Wiring Tips

  1. Power Down: Turn off the scooter and disconnect the battery pack before removing the wheel or touching controller wiring.
  2. Transfer Brake Rotor: Unscrew the 6 rotor bolts from your old wheel and transfer the disc brake rotor onto the new hub. Fasten in an alternating criss-cross star pattern with threadlocker.
  3. Seat Axle in Dropouts: Ensure the torque washers and axle flats align correctly into the swingarm slots to prevent axle spinning under acceleration.
  4. Connect Phase & Hall Leads: Plug the 3 motor phase wires (Yellow, Green, Blue) and the 5-pin Hall sensor plug into your scooter controller harness. Test motor rotation before tightening all swingarm bolts.

Frequently Asked Questions (FAQ)

Q: Can this motor wheel be used on both 48V and 52V scooters?

A: Yes. The internal copper windings and insulation are rated for both 48V and 52V battery systems without risk of overheating or electrical breakdown.

Q: Is the ChaoYang 80/60-6 tire already installed on the wheel?

A: Yes, this is a complete pre-assembled unit. The ChaoYang 80/60-6 tubeless tire is already mounted and beaded onto the hub motor rim, saving you the effort of mounting a tough tire onto a motor rim.

Q: Can this be installed as either the front or rear motor?

A: Yes, it is compatible with both front and rear positions on FLJ C11 and T11 scooters, provided your swingarm dropout spacing matches standard 10-inch electric scooter axle specifications.

Q: What warranty and transit guarantee does E Smart Way offer?

A: E Smart Way provides free worldwide tracked shipping, comprehensive transit loss protection, and a 6-month replacement warranty covering motor stator, magnets, and wiring defects.

International Shipping & Logistics Notice

Free Worldwide Tracked Shipping: Hub motor wheels are packaged in heavy-gauge reinforced cartons with molded foam cushioning to protect the axle threads, brake rotor mount, and tire bead during transit.

Customs & Import Duties: Depending on national regulations, international consignments may occasionally be subject to local VAT or clearance fees assessed by destination customs authorities. As standard in international cross-border trade, these charges remain the buyer's responsibility.

Accurate Delivery Details: Please double-check your shipping address and contact telephone number at checkout to ensure seamless courier delivery.

Shop The Full Collection

#410 8T/9T/11T Electric GoKart Scooter Sprocket Gear for Engine Chain Drive Razor MX500 Dirt Rocket Bike DC Motor MY1020 Pinion

#410 9T Electric Razor Scooter Sprocket Gear E300 Chain Drive Ebike Unite Motor MY1016 Pinion for #410 1/2"x1/8" Bicycle Chain

0.5/2.5/4Kg Load 3-Axis Mechanical Robot Arm Industrial Manipulator Robot for Robotic Arm Compatible Stepper Motors/Suction Cups

0.5kg Load Industrial 3 Axis Robotic Arm Planetary Reduction Manipulator Open Source Secondary Development Teaching Robot

Related products