REDDYDY RD2 60V Dual Motor Brushless Controllers (A & B) & Large LCD Display Kit (5000W)
BscreencontrollerAB
$640.68
Skip to product information
REDDYDY RD2 60V Dual Motor Brushless Controllers (A & B) & Large LCD Display Kit (5000W)
$640.68
Restore the raw power, responsive acceleration, and digital cockpit precision of your high-performance scooter with the genuine REDDYDY RD2 60V Dual Motor Brushless Controller & Large LCD Display System. Engineered specifically as direct factory replacement hardware for the REDDYDY RD2 5000W 60V Electric Scooter, this modular powertrain electronics suite is available as individual replacement components or as a complete, factory-matched system overhaul.
Whether you need to replace a damaged individual motor drive unit, upgrade to the high-visibility central digital instrument cluster, or restore both drive channels simultaneously, these OEM components deliver seamless dual-motor synchronization, intelligent heat dissipation, and rugged waterproof wiring.
Key System Features & Engineering
- OEM Dedicated Synchronous Drive: Tailored specifically for the 5000W peak output of the REDDYDY RD2, maintaining flawless phase-angle and torque distribution between front and rear hub motors.
- Heavy-Duty Heat Sink Enclosures: Extruded aluminum alloy controller housings with deep cooling fins rapidly channel heat away from high-current power MOSFETs during sustained high-speed rides and steep hill climbs.
- Central High-Definition "Big Screen" LCD: Wide-format central digital display offers high-contrast visibility even in direct sunlight, presenting real-time speed, battery voltage level, dual/single drive status, mileage, gear modes, and diagnostic fault codes.
- Modular Component Selection: Choose from Front Controller A, Rear Controller B, matched A+B controller pairs, the Big Screen display, or the full 3-piece matched suite.
- Plug-and-Play Waterproof Connectors: Color-coded wiring harnesses match the RD2 chassis loom for straightforward replacement without soldering or complex repinning.
CRITICAL PROTOCOL COMPATIBILITY NOTICE:
Electric scooter displays and motor controllers communicate via proprietary software protocols. Before ordering an individual controller or display, please confirm your existing hardware matches the original REDDYDY RD2 factory components. If your scooter currently uses a different brand or generation, we strongly recommend replacing the Big Screen + Controller A + Controller B simultaneously to ensure complete digital handshake and error-free operation.
Technical Specifications Matrix
| Parameter | Specification |
|---|---|
| Nominal Operating Voltage | 60V DC (Standard 16S Li-ion Battery Systems) |
| Vehicle Compatibility | REDDYDY Electric Scooter RD2 (5000W Dual-Drive) |
| Controller Type | Brushless DC (BLDC) Motor Speed Controller |
| Drive Channel Designation | Controller A (Front Motor) / Controller B (Rear Motor) |
| Display Type | High-Definition Central Digital LCD with Handlebar Mount |
| Casing Material | Extruded Anodized Aluminum Alloy with Sealed Endcaps |
| Protection Systems | Over-voltage, low-voltage cutoff, thermal overload, and short-circuit protection |
Available Purchasing Options
- BscreencontrollerAB (Complete Kit): Includes 1× Central Big Screen LCD Display + 1× 60V Front Controller A + 1× 60V Rear Controller B. Recommended for complete powertrain overhauls or system upgrades.
- Big screen: Central large-format LCD display with handlebar mounting bracket and main loom connector.
- 60V Front Controller (Controller A): OEM 60V front drive motor controller.
- 60V Rear Controller (Controller B): OEM 60V rear drive motor controller.
- Front and Rear (Controllers A + B): Matched dual-controller pair (display not included).
Component & Wiring Visual Breakdown
Installation & Safety Tips
- Disconnect Main Power First: Always switch off the scooter and disconnect the main 60V battery pack before unplugging or replacing electronic controllers.
- Label Connections: Take clear photos of your existing wiring harness before removing old controllers to ensure each connector (phase wires, Hall sensors, throttle, display, brake cut-offs) returns to its exact partner.
- Thermal Paste / Deck Contact: Ensure controllers are firmly seated against the scooter's aluminum chassis floor to facilitate conductive heat transfer.
- Bench Test Before Deck Closure: Reconnect the battery with the scooter on a stand (wheels elevated) and perform a throttle check to verify both wheels rotate forward correctly before resealing the deck cover.
Frequently Asked Questions (FAQ)
Q: How do I know whether I need Controller A or Controller B?
A: Controller A is calibrated to drive the front hub motor, while Controller B drives the rear hub motor. Check the label on your existing controller inside the scooter deck to see whether unit A or unit B requires replacement.
Q: Can I use this Big Screen display with other brand controllers?
A: We do not recommend mixing this display with non-OEM controllers. Electric scooter LCD displays communicate using specific serial protocols. To ensure flawless operation, purchase the complete kit (Display + Controller A + Controller B) if your scooter currently has non-RD2 hardware.
Q: What warranty and transit guarantee does E Smart Way provide?
A: Every controller and display is factory tested prior to dispatch. E Smart Way provides free worldwide tracked shipping, 100% transit damage protection, and a 6-month product warranty against manufacturing defects.
International Shipping & Logistics Notice
Free Worldwide Tracked Shipping: Controllers and delicate LCD displays are packaged with anti-static shielding and thick shockproof cushioning.
Customs & Import Duties: Depending on national regulations, international shipments may occasionally incur local VAT or customs clearance fees. As standard in international cross-border trade, these fees remain the buyer's responsibility.
Accurate Delivery Details: Please double-check your shipping address and contact telephone number at checkout to ensure prompt courier delivery.
