Humanoid Robot Hands with LX-824HV Serial Bus Servo Flexible Opening Robot DIY Kit for Arduino/ESP32 Programmable Robot Fingers
Robot Palm / CHINA
$168.00
Skip to product information
Humanoid Robot Hands with LX-824HV Serial Bus Servo Flexible Opening Robot DIY Kit for Arduino/ESP32 Programmable Robot Fingers
$168.00
Humanoid Robot Hands with LX-824HV Serial Bus Servo Flexible Opening Robot DIY Kit for Arduino/ESP32 Programmable Robot Fingers
Product parameter:
Robot hand
Working Voltage: 6-7.4V
Min Working Current: 1A
No-Load Current: 100mA
# Spline: 25T(6mm diameter)
The default wire: 30cm
180 degree rotation. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when power off
Control Specifications:
Control Method: PWM
Pulse Width: 500~2500
Duty Ratio: 0.5ms~2.5ms
Pulse Period: 20ms
Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree
1.Package list:
-- 1*Big U stand
-- 1*hand stent
-- 1*LDX218 digital servo
-- 1 set of screws
-- 2* Special steering wheel
the main axle steering wheel (4 mm) and the auxiliary shaft steering wheel (2 mm )
2.Note:
1.Delivery is a bulk, need customer to install, installation is simple.Before installation, please turn servo to 90 degrees.
2.In the opening and closing of the palm of robot,servo range less than 90 degrees! So beware oflocked-rotor!
