Alfawise VRLF1001 Dual Hub Motor Electric Skateboard
• Slight Drop Down Deck
Generous W concave and slight drop on the nose of the deck helps lock rider's feet on the deck and thus ensure a stable and smooth ride. Rider no longer need to gain more control on the deck by moving his feet
• Lower Centre of Gravity
The deck is 11.5cm to the ground. This adds up to the stability of the board
• Minimum Battery Sag
Our 40A battery cells help reduce the battery sag to a significantly low level. Unlike other electric skateboards, our boards won’t experience significant say until the battery is at its 10 percent capacity while other boards sag when the battery is at 50 percent
• Enhanced Signal Connection
We added a big antenna to the ESC to enhance the signal connections and ensure the remote never lose connections
• Easiest Deck Swap
Our board is mounted on the deck with only four screws. You can do the easiest deck swap on our board. Four screws out, and you're good to go for another deck
Specification
Hub motors:
• Voltage: 36V
• Nominal wattage: 250W
• Maximum wattage: 400W
• Torque: above or equals 1.2N.m
• Maximum torque: 4N.m
• Remote control: built-in 400mAh Li-ion battery, 20m remote distance
Battery
• 10S2P, 36V
• 300W, 4.0Ah
• 20R cells, 40A max. continuous discharging rate
• Minimum battery sag
• Charge / discharge cycles: 300 ( battery will still have 80% capacity left after 300 cycles )
ESC
• Max continuous current: 2 x 12A
• 3 speeds ( 20KMPH, 30KMPH, 38KMPH )
• 100 percent glued, IPX7 waterproof
• Smoothest acceleration and smoothest braking
• Remote working distance: 20m ( open field )
• Added a big antenna on the ESC to greatly enhance the signal
The Alfawise VRLF1001 Dual Hub Motor Electric Skateboard is a sensational customer favorite, and we hope you like it just as much.
Inventory Last Updated: Apr 24, 2024
